1. Do not touch the electrical metal grid with hand or by holding metal objects when electronic mosquito bat is working.
2. Do not use in the places where are storing inflammable and explosive gas or liquid. Do not use conductive materials to touch or spark the electrical metal grid.
3. Do not expose the product to the rain or moisture, do not immerse the unit into water or in other liquid. Use long-hair soft brush or pat it for few times gentlely to remove the insect residues from the grid surface. Do not use water or a damp cloth to clean the grid or the body, and do not spray on the grid in case of a short circuit.
4. In humid weather, the voltage of product might be lower than the normal working voltage, and killing efficacy will be reduced because of moisture absorption, it should be air-dried or sun-dried ( but should not be over exposed under the sun ) on time, then killing efficacy will be recovered.
5. Switch to "OFF" position when not in use, do not hit other hard objects to avoid damaging the metal grill.
6. Please recharge the product in time when run out of power, please do not use it when charging. Maximal charging time should be no more than 12hours.
7.The charging power supply and socket installation shall comply with safety regulations.
8. Do not open the cover of the battery case, do not detach the battery.
9. This is a tool for killing pests, there will be residual electricity after used, do not give to children to play with as a toy, and should keep far away from children.